Home Our Products Overview Pyrometer Accessories Pyrometer
Accessories Pyrometer
Which parts do you need?
- Spare parts,
- seals,
- ceramics,
- water separator ...
Here you find an overview drawing.
|
Product no.: E-KS-3
Cooling coil for hot gases, for connection at the exit of the pyrometer, protects the suction hose. |
263.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 16.011-ZU
condensate, water separator: Ø 150 x 300 mm, with two gas connectors with quick hose release connector. |
728.00 €
*
Manufacturing time |
|
|
|
Rotameter for the indication of the flow rate. (Flow rate: 0,6 - 6,0 m³/h)for the indication of the flow rate, range 0,6-6,0 or 0,2-2,4 m³/h or 20-360 l/h, with two quick release hose coupling. |
343.00 €
*
Manufacturing time |
|
Ejector suitable for the suction by means of compressed air. Suction volume depends on the pressure of the compressed air. |
583.00 €
*
Manufacturing time |
|
Product no.: 50.018
Exchangeable socket for the ceramic shields (VDI and (IFRF). For fast exchange of the ceramics at the suction pyrometer. |
239.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 50.094
three parts according to IFRF, suction lateral, optimum protection of the thermocouple against IR radiation. For the use up to 1700 °C. |
331.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 50.09
Outer and inner ceramic shield according to VDI/VDE 3511, part 5 for pyrometer. For the use up to 1700 °C. |
132.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 50.09-C
to cementate the ceramic shield into the bayonet socket. Ready for use mixture. Operating temperature: 1400-1600 °C |
78.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 50.019
for two parts ceramics according to VDI/VDE 3511, part 5, from special high grade Stainless Steel (1.4841) for up to 1200 °C. |
299.00 €
*
Manufacturing time |
|
|
|
|
Product no.: 50.0161
for the protection tube 50.019 of pyrometer according to VDI, wire, material: 1.4841 (package with 10 pcs). |
16.00 €
*
Manufacturing time |
|
|
|
| 1 - 10 of 17 results |
|