Range of application:
Isokinetic sampling according to:
Depending on the dust range can use one tubular filter (> 50 m/m³)
or one plane filter (< 50 mg/m³).
The measurement of the gas velocity take place at a second support with Pitot tubes (see gas velocity measurement).
You need for complete sampling line:
Product no.: 4.9-PME-V1
PME probe for the determination of particulate matter according to DIN EN 1650-1 Annex F |
3,728.00 €
*
Manufacturing time |
|
Product no.: 7.2
for dust range up to 50 mg/m³ for IN- and OUT-Stack-Measurements, for plane filter Ø 45, 47 and 50 mm. |
from
1,069.00 €
*
Manufacturing time |
Product no.: 7.01
Simple tubular filter device for dust range |
from
1,205.00 €
*
Manufacturing time |
Product no.: 2.07-D-A
Nozzles according to EN 13284-1, EPA 5 and ISO 9096 for the gooseneck bent (2.07-K). Material: Stainless Steel. |
from
108.00 €
*
Manufacturing time |
90° bent for screwed mini nozzles with thread M 12 and chimney sealing for openings from 16 to 20 mm |
290.00 €
*
Manufacturing time |
90° bent for mini nozzles with thread M 12. Bent R= 25 mm, tube 10 x 1 mm. Material: Stainless Steel. |
277.00 €
*
Manufacturing time |
Product no.: 47.5-10-3
Mounting for tubes with outer diameter 10 mm to be fixed in threads from sleeves with G ¾ threads. |
132.00 €
*
Manufacturing time |
|
Product no.: 35.03-MK
Heater for all filter devices with heat control, no temperature controller necessary, not for connection to suction tube. |
1,504.00 €
*
Manufacturing time |
|
Product no.: 26.03
Complete sampling rack with dry running rotary vane vacuum pump, gas meter and flow meter. |
4,436.00 €
*
Manufacturing time |
|
Product no.: 2.17-A
Additional part (extension) to fix the heater at the end of the filter device, with turn indicator. |
183.00 €
*
Manufacturing time |
|
Additional parts for the dust measurement: Accessories parts for filter devices and suction line.