The combination probe
an advanced development of the standard suction tubes.
For a better isokinetic sampling one Pitot tube and one thermocouple type K (NiCr Ni) are inserted into the outer tube.
Both are installed parallel to the inner tube. The gas velocity and the temperature can be determined by this arrangement directly at the sampling point.
On request with additional 6 x 1 mm empty pipe for additional gas extraction (surcharge).
- outer-diameter: Ø 60 mm,
- exchangeable Pitot tube (in the scope of delivery type B: S-Pitot according to EN ISO 16911-1),
- thermocouple NiCr-Ni type K,
- exchangeable inner tube,
- hose quick-connector,
- entrance: Internal thread G ½
- exit: External thread G ½.
Electrical heated version: electrical heated with one heater cartridge 230V/50 Hz (> 400 VA/m), with additional thermocouple for the regulation of the heater.
Water cooled version: the cooling water would be guided along the inner tube, turned round and flows along the outside wall.
Please remember to order because it is not included in the delivery:
- matching adapter for the front (Art.-Nr.: 3.01, see accessories).
- inner tubes.
- manufacturer's certificate of the Pitot tube according to EN ISO 16911-1.
- other versions of the Pitot tubes instead of version B.
- gooseneck and nozzles.
Lengths over 3000 mm on request!
Extensible combination probe: Information here; for request see here.