Quick fastener holder

Holder for fixing the suction pipe at the sleeve from the measuring point.

Material: Stainless Steel pipe with two Aluminium half-pans on the inside.

• the lower half-pan is firmly screwed on while the upper pan is moved by a toggle.
• shifting the suction pipe works fast and easily through the toggle.
• the suction pipe is not damaged by the half-pans even under strong loading.
• the holder is not gas-tight.
• Length: small: 150 mm; big: 180 mm

The holder needs at least the length of half a sleeve / socket (approx. 30 mm).

Gas-tight holders made of Stainless Steel for suction tubes.

The gas-tight closure is achieved by a packing cord which is pressed against a flange on the suction pipe by means of screws.

For shifting the suction pipe the flange is loosened.

The holder needs at least the length of half a sleeve / socket (approx. 30 mm).

Quick fastener holder with O-ring

Holder for fixing the suction pipe at the sleeve from the measuring point. In the threaded part is mounted one O-ring seal made of fluororubber (FKM).

Material: Stainless Steel pipe with two Aluminium half-pans on the inside.

• the lower half-pan is firmly screwed on while the upper pan is moved by a toggle (small holder without toggle).
• shifting the suction pipe works fast and easily.
• the suction pipe is not damaged by the half-pans even under strong loading.
• the holder is through the FKM O-ring gas-tight. 
• Operating temperature: -20 °C .. 200 °C.
• Length: small: 150 mm; big: 180 mm

The holder needs at least the length of half a sleeve / socket (approx. 30 mm).

Sleeve reduction

The holder can be adapted to the different coupling sleeves / sockets at the measuring points through sleeve reductions (bushing (M/F).

• the sleeve reduction is composed of Stainless Steel and an internal thread.

Universal-Flange

Using this universal flange you can combine our standard suction tube holder at duct openings with flange.

• with G3 sleeve from Stainless Steel,
• matching for flange ASTM 2½" - 4"
• Ø 250 mm, bolt circle Ø from 132 to 212 mm,
• 4 oblong holes Ø 22 mm,
• flange thickness: 10 mm,
• weight: ~ 2 kg.

O-ring from fluororubber

To seal suction tube inside the holder with O-Ring, material: FKM (fluororubber).

• Temperature range: -20 ... 200 °C.

Temperature controller

for all filter heaters and all electrical heated suction tubes with integrated thermocouple NiCr-Ni.

Housing from Makrolon, with permanent digital 3-digit reading of the actual and set temperature. 

Indication temperature and controlling range (NiCr-Ni): 0 .. 1000 °C, power output: 5 A, 230 V.

• output for heater with exchangeable relay for resistive load,
• status-LED,
• control structure: optimized heating, manually heating with pulse generator ON/OFF,
• soft start function,
• adaptive optimization,
• switchable to manual heating (impulse heating without thermocouple),
• temperature emergency stop,
• inkl. 1,8m power cord,
• voltage: 210-240 VAC,
• resistive load: 5 A,
• operating temperature: -10 to 40 °C.

Temperature controller

Temperature controller for electrical heated suction tubes with double heater cartridge with 2000 Watt power, eg. Mercury-MTP-Probe.

Housing from Makrolon, with permanent digital 3-digit reading of the actual temperature. 

Indication temperature and controlling range (NiCr-Ni): 0 .. 1000 °C, power output: 10 A, 230 V.

• output for heater with exchangeable relay for resistive load,
• status-LED,
• control structure: ON/OFF, P, PI, PID - heating,
• self-optimization,
• adaptive optimization,
• temperature emergency stop,
• switchable to manual heating (impulse heating without thermocouple),
• voltage: 210-240 VAC,
• resistive load: 10 A,
• operating temperature: -10 to 40 °C.

Stuffing gland to seal the inner tube of a suction tube.

• Thread G ½ with hole for inner tube (Hexagon plug).

Cooling coil for hot gases

for the mounting behind the suction tube to cool down the hot gases and protect the suction hose.

• entrance: screw cap G ½,
• exit: external thread G ½ or G ¾,
• made from Stainless Steel,
• with fast hose connectors,
• cooling coil: 3 m Stainless Steel tube 10 x 1 mm,
• Ø OD 130 mm x 150 mm, weight: ~ 1,0 kg.