Titanium cone

Cone for the tubular filter, matching for glass- and quartz fiber thimbles from comp. Munktell.

The cone ensures that the gas flows through the thimble.

It is not necessary to condition the cone with the single glass- or quartz fiber thimble, 2-3 cones are sufficient for all samples.

• outer-diameter: Ø 21 - 22 mm,
• collar: 35 mm,
• weight:  ~ 20 g.

Inox Cone for Munktell thimbles G-TI/603 GM

Cone for the tubular filter, matching for for glass- and quartz fiber thimbles from comp. Munktell.

The cone ensures that the gas flows through the thimble.

It is not necessary to condition the cone with the single glass- or quartz fibre thimble, 2-3 cones are sufficient for all samples.

• outer-diameter: Ø 21 - 22 mm,
• collar: 35 mm,
• material: Stainless Steel.

Transport glasses

 for save transport of the filter cardriges with Art-No: 8.01 and 8.02.

• glass with thread and cover for asve transport.

Transport glasses for filter thimble 8.01/8.02,  with Gl 45 thread, Material: Duran, heat resistant cover up to 200 °C.

Suitcase

for safe and free of contaminations:

• for 8 transport glasses

Not in the delivery capacity: transport glasses.

Glass- or quartz fiber thimbles type Gothe from comp. Munktell / Ahlstrom.

• retention > 0,3 µm: 99,998 %,
• outer- Ø: 26 mm, internal-Ø: 21,5 mm,
• length: 68 mm,
• weight ca. 3 g,
• pressure drop 4 m³/h: ca. 200 mbar,
• unit with 25 pcs.

Glass fiber: Maximum temperature range of use: 200 °C according to EN 13284-1, according manufacturer: 500 °C.

Quartz fiber: Maximum temperature range of use: 700 °C according to EN 13284-1, according manufacturer: 900 °C.

Glass wool 1000 g

• Glass wool for stuffing the filter catridge,
• Amount: 1000 g, superfine,
• Maximum temperature: 200 °C.

Basic requirements for filter materials:
The filter material shall not react with or adsorb gaseous compounds contained in the gas to be sampled, and shall be thermally stable, taking into account maximum temperature anticipated (conditioning, sampling etc.).

Glass fibre filters have very good mechanical strength, but may react with acidic compounds such as SO3, which leads to an increase in weight; the usability must therefore be checked.

Quartz wool 500 g

• chemically pure,
• fiber size 5 to 30 µm,
• for stuffing the filter catridge,
• Maximum temperature for Quartz fibre: 700 °C.

Basic requirements for filter materials:
The filter material shall not react with or adsorb gaseous compounds contained in the gas to be sampled, and shall be thermally stable, taking into account maximum temperature anticipated (conditioning, sampling etc.).

Despite their weak mechanical properties quartz fibre filters are proven to be efficient in most cases.
Quartz fibre has proved to be resistant to chemical influences and does not show any considerable mass changes due to reaction with flue gas components as HF, HCl, SO2, SO3, H2SO4, NO and NO2.

Cartridge for high dust filter device

Matching cartridge to plug with glass fibre for high dust filter device.

Size of the cartridge:

• internal Ø: 56 mm,
• length: 150 mm,
• out of high-grade steel with high-grade steel filter base,
• weight ca. 365 g.

Matching basket for high dust filter device

Basket for glass fiber thimbles.

Size of the basket:

• internal Ø: 56 mm,
• length: 150 mm,
• of high-grade steel,
• weight ca. 80g